![]()
PLX3602 Specifications
The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.
The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3602 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
* CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits
SPECIFICATIONS
PLX3602 STEREO MODE, both channels driven * 8 ohms
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD
725 W
775 W4 ohms
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD
1100 W
1250 W2 ohms EIA 1 kHz 1% THD 1800 W BRIDGE MONO MODE * 8 ohms
20 Hz-20 kHz 0.1% THD
EIA 1 kHz 0.1% THD
2500 W
2600 W4 ohms 1 kHz 1% THD 3600 W Signal to Noise (20 Hz - 20 kHz) -107 dB Input Sensitivity @ 8 ohms 1.25 Vrms Gain @ 8 ohms 36 dB Output Circuitry 2-Tier Class H Distortion (SMPTE-IM) Less than 0.02% Typical Distortion
1/8 rated power, 20 Hz-20 kHz
Full rated power, 20 Hz-20 kHz
Less than 0.02%
Less than 0.02%Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 500 Input Impedance 20k ohms balanced
10k ohms unbalancedInput Clipping 11 Vrms (+21 dBu) Cooling Variable-speed fan, rear-to-front air flow Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik® NL4 Speakon® and Touch-proof binding posts
(Both channels available on Ch 1 NL4 connector)Rear Panel Switches Input Configuration: Bridge/Stereo/Parallel
Clip Limiters each channel
Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic)Front Panel Controls Detented Gain Attenuator: 0 to dB
Power On/OffFront Panel Indicators Clip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED
Parallel: Amber LED
Bridge Mono: Amber LEDPROTECTION Amplifier Protection Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loadsLoad Protection On/off muting, DC-fault power supply shutdown Infrasonic -3 dB, 5 Hz DC fault Power supply shutdown Ultrasonic -3 dB, 85 kHz Short Circuit Cutback Thermal Muting at 90° C Over Current Active clip limiting
Power supply cutbackHigh Line Standard +15%, survive +25% Low Line -33% PHYSICAL Dimensions
Height
Width
Depth, Rack mounting surface to rear panel
Overall Depth
3.5" (8.9 cm) 2 rack spaces
19" (48.3 cm)
12.8" (32.6 cm)
14.875" (37.9 cm)Weight 21 lbs. (9.5 kg) net
26 lbs. (11.8 kg) shippingAgency Approvals CE, FCC, cUL, UL
CURRENT CONSUMPTION
PLX3602 1/8 Power (pink noise) 8 ohms
4 ohms
2 ohms7.7A/120V
11.5A / 120V
18A / 120V1/3 Power (pink noise) 8 ohms
4 ohms
2 ohms13A/120V
19.5A / 120V
31A / 120VFull Power 8 ohms
4 ohms
2 ohms25A/120V
40A / 120V
63A / 120VNotes Long term, active-limited to 30A/120V