215 Dual 15-Band Graphic Equalizer

 The dbx® 2-Series Graphic Equalizers have been designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straight forward controls. The 215 not only provides standard features like dual channels, 15 2/3 octave bands, ISO frequency meters, +/- 12dB input gain range, and switchable 50Hz/12dB octave low-cut filters, but also includes other thoughtful features. These features include: 20 mm faders; selectable +/-6dB or +/-12dB boost/cut range for precise gain adjustments; XLR, and 1/4" TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx® 2-Series has been pursued to make your job easier.

The 2-Series represents a major step forward in the performance of entry-level graphic equalizers. From its amazing 10Hz to 50kHz frequency response, to its 108dB dynamic range, internal toroidal transformer, the 2-Series offers out of this world specifications wit a own to earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the 2-Series is destined to take its rightful place in tHe lineage of great dbx® signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.

Features:

  • Two 15-band, 2/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of ±6 or ±12 dB
  • 12dB per octave, 3dB down @ 50Hz low-cut filter
  • Front panel bypass switch
  • ±12 dB input gain range
  • 4-segment LED ladders for monitoring output levels
  • XLR and TRS Inpts and Outputs
  • Internal Toroidal Transformer
  • Frequency Repsonse of <10Hz to >50kHx
  • Dynamic range of greater than 108dB

    •  Specifications:

    		  
     INPUT  
     Connectors:  1/4" TRS, female XLR (pin 2 hot)
     Type:  Electronically balanced/unbalanced, RF filtered
     Impedance:  Balanced 40k ohm, unbalanced 20k ohm
     Max Input Level:  >+21dBu balanced or unbalanced
     CMRR:  >40dB, typically >55dB at 1kHz
     OUTPUTS  
     Connectors:  1/4" TRS, male XLR (pin 2 hot)
     Type:  Impedance-balanaced/unbalanced, RF filtered
     Impedance:  Balanced 100 ohm, unbalanced 50 ohm
     Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
    >+18dBm balanced/unbalanced (into 600 ohm)
     SYSTEM PERFORMANCE  
     Bandwidth:  20Hz to 20kHz, +0.5/-1dB
     Frequency Response:  <10Hz to >50kHz, +0.5/-3dB
     Dynamic Range:  108dB
     Signal-to-Noise:  90dB
     THD+Noise:  <0.004%
     Interchannel Crosstalk:  <-80dB, 20Hz to 20kHz
     FUNCTION SWITCHES  
     EQ Bypass:  Bypasses the graphic equalizer section in the signal path
     Low Cut:  Activates the 50Hz 12dB/octave high-pass filter
     Range:  Selects either +/- 6dB or +/- 12dB slider boost/cut range
     POWER SUPPLY  
     Operating Voltage:  100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
     Power consumption:  12W
     Main Connection:  IEC receptacle