XTi Series   Minimum Guaranteed Power, 1 kHz XTi 1000 XTi 2000 XTi 4000 Per channel, both channels driven Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 4 ohms Bridge-Mono, 8 ohms 700W** 500W* 275W* 1400W** 1000W* 1000W** 800W* 475W* 2000W** 1600W* 1600W** 1200W* 650W* 3200W** 2400W* *With 0.5% THD. **With 1% THD.               The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class. Integrated proprietary DSP with LCD front panel display Accurate, uncolored sound with very low distortion for the best in music and voice reproduction Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Extremely versatile, handling a wide range of speaker impedances and outputs Switch-mode universal power supply Speaker presets for crossover frequencies, EQ, limiting, and delay All products fill 2U rack spaces and weigh under 17 pounds; weight sets a new standard in lightweight amps (20% less) Speakon® and binding post outputs, XLR inputs and loop-thrus Comprehensive LED status per channel Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications Sensitivity (volts RMS) for full rated power at 4 ohms 1.4V Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted 100 dB Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors. AC Line Current XTi 1000: 6.5A, XTi 2000: 6.9A, XTi 4000: 8.0A. At idle: Draws no more than 90 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load impedance (note: safe with all types of loads) Stereo Bridge mono 2-8 ohms 4-16 ohms Voltage Gain (at 1 kHz, 8 ohm rated output) XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB Maximum Input Signal +22 dBu typical Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V, 220-240V 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D Net Weight, Shipping Weight 18.5 lb (8.4 kg), 21.5 lb (9.8 kg)